Steel Plate
-
High Quality 2mm 301 304 316 Stainless Steel Sheet
316l stainless steel plates are divided into four categories according to their organizational structure.
Austenitic stainless steel plate, martensitic stainless steel plate (including precipitation hardening stainless steel plate).
Ferritic stainless steel plate, and austenitic ferritic duplex stainless steel plate.
-
G550 Pre-coated DX51D SPCC Galvanized Steel Coil
Color coated coil is a product of hot galvanized sheet, hot aluminized zinc sheet, electrogalvanized sheet, etc., after surface pretreatment (chemical degreasing and chemical conversion treatment), coated with a layer or several layers of organic coating on the surface, and then baked and cured. Because coated with a variety of different colors of organic paint color steel coil board named, short for color coated coil.
-
Hot-dipped galvanized steel sheet 0.35mm from best-selling manufacturers
Galvanized steel plate is a welded steel plate with hot-dip or electro galvanized coating on the surface, which is generally widely used in construction, household appliances, vehicles and ships, container manufacturing, electromechanical industry, etc.
The development of hot dip galvanizing production in China has been lagging behind. From 1950s to 1960s, 13 flux hot-dip galvanizing units for single sheet steel plates were successively built, with a capacity of 100000 t / A. However, due to the defects of low output, high cost, poor quality, environmental pollution, poor economic benefits and so on, they have been stopped and switched to production. From the late 1970s, China began to build large-scale broadband hot-dip galvanizing units.
-
ASTM Q235 Q345 carbon steel plate
What is the material of carbon steel plate: It is a kind of steel with carbon content less than 2.11% and without deliberately adding metal elements. It can also be called plain carbon steel or carbon steel. In addition to carbon, it also contains a small amount of silicon, manganese, sulfur, phosphorus and other elements. The higher the carbon content, the better the hardness and strength, but the plasticity will be worse
-
Wear resistant 10mm thick hot rolled carbon steel plate
The wear-resistant steel plate is composed of low-carbon steel plate and alloy wear-resistant layer, which is generally 1/3~1/2 of the total thickness. When working, the matrix provides comprehensive properties such as strength, toughness and plasticity to resist external forces, and the alloy wear-resistant layer provides wear-resistant properties that meet the requirements of specified working conditions.